Yekaterinburg: +7 (343) 217-02-02
Moscow: +7 (495) 660-52-00

Technical Information


ICS Penetron is dedicated to maintaining not only the highest product quality standards possible, but also to serving its customers through extensive worldwide availability and technical support.

In this area you will find information on Technical Specifications, Testing and Certification, Safety, and Proper Usage of the PENETRON® system. For further information, contact the Technical Department of ICS/Penetron International Ltd. or your local Penetron® representative.


SURFACE PREPARATION: The concrete or concrete block surface to receive the PENETRON® system must be structurally sound and should be free from dirt, soil, oil, form release agents, laitance and/or any other foreign materials, which may impair the bond, penetration and or overall performance of the PENETRON® materials.

Extremely smooth concrete surfaces must be waterblasted, sandblasted or acid etched. Concrete surfaces should have an open capillary system.

Form ties with insets will be removed and where form ties are without insets, the concrete will be chipped back approximately one (1) inch. Rout out visible cracks exceeding 0.01" in size to a depth of 3/4" (1.9 cm) to 1" (2.54 cm). Also rout out honeycombed pockets and faulty construction joints to sound concrete. Construction joints are routed or provided with a formed 3/4" (1.9 cm) X 3/4" (1.9 cm) reglet.    

Wet down surface lightly prior to the application of the PENETRON® system. Moisture must be present in the concrete strata to assure maximum chemical penetration. Surfaces should be damp when the PENETRON® coatings are applied. The surface to be treated should never have a shiny appearance.

Group of companies "Penetron-Russia"
Jukovsky sqr., Yekaterinburg, Russia
Tel.: +7 (343) 217-02-02

Representative office 2-24, Ryasansky pr., Moscow
Tel.: +7 (495) 660-52-00
Hot line 8 800 200-7092

© Group of companies "Penetron-Russia", 1991-2007
Hot line 8-800-200-7092